106

Linking AE to AF Point during Multi-segment

Metering

In [6. Link AE to AF Point] of the [ACustom Setting 1] menu (p.81), you can link the exposure and AF point in the focusing area during multi-segment metering.

1

Off

Exposure is set separately from the AF point. (default setting)

2

On

Exposure is set in accordance with the AF point.

4 ShootingFunctions

Using the Center-Weighted Metering

Metering is weighted at the center of the viewfinder. Use this metering when you want to compensate the exposure by experience, instead of leaving it to the camera. The illustration shows that sensitivity increases as the pattern height increases (center). This mode does not automatically compensate for backlit scenes.

Using the Spot Metering

With spot metering, brightness is measured only within a limited area at the center of the viewfinder as shown in the illustration. You can use this in combination with the AE lock (p.108) when the subject is extremely small and the correct exposure is difficult to obtain.

Setting the Meter Operating Time

You can set the exposure metering time to [10 sec.] (default setting), [3 sec.] or [30 sec.] in [4. Meter Operating Time] of the [ACustom Setting 1] menu (p.81).