286
Detecting Dust on the CMOS Sensor (Dust Alert)Dust Alert is the function that detects dust adhering to the CMOS sensor and visually displays the location of the dust.
You can save the detected image and display it when performing sensor cleaning (p.287).
The following conditions must be met before using the Dust Alert function:
-A DA, DA L, FA J lens or a D FA, FA and F lens that has an Aperture s(Auto) position is attached.
-The aperture is set to the sposition when using a lens with an aperture ring.
-The mode dial is set to any mode other than C (Movie).
-The focus mode lever is set to =.
1Select [Dust Alert] in the
The [Dust Alert] screen appears.
2 |
|
|
|
Fully display a white wall or |
|
| |
Dust Alert |
| ||
| uniformly bright subject in the | Checks for dust on the sensor. | |
| viewfinder and press the shutter | ||
| Press shutter release button | ||
| release button fully. | to reveal dust location | |
| After image processing is performed, the |
|
|
| Dust Alert image appears. |
|
|
| If the message [The operation could not | MENU | SHUTTER Check |
|
|
| |
| be completed correctly] is displayed, |
|
|
| press the 4button and take another picture. |
| |
113 Press the 4button.
Appendix | The image is saved and the camera | |
returns to the | ||
|
x1 | OK Exit |