4
•The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.
•Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove the camera after temperature of the camera and surroundings are equalized.
•Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause the camera to breakdown. Wipe dry any rain or water drops on the camera.
•Please do not press forcefully on the monitor. This could cause it to break or malfunction.
•Be careful not to overtighten the screw in the tripod socket when using a tripod.
Cleaning Your Camera
•Do not clean the product with organic solvents such as thinner, alcohol, or benzene. This may cause color fading or discoloration.
•Use a lens brush to remove dust accumulated on the lens or viewfinder. Never use a spray blower for cleaning as it may damage the lens.
•Please contact a PENTAX Service Center for professional cleaning of the CMOS sensor. (This will involve a fee.)
Storing Your Camera
•Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera. Remove the camera from its case and store it in a dry and
Other Precautions
•Periodic inspections are recommended every one to two years to maintain high performance.
•Refer to “Precautions When Using the SD Memory Card” (p.45) regarding the SD Memory Card.
•Please note that deleting the data recorded on an SD Memory Card or formatting an SD Memory Card using a camera or computer will not necessarily delete the data so that they cannot be recovered using
Regarding Product Registration
In order to better serve you, we request that you complete the product registration, which can be found on the