166

Using the Built-in Flash in Wireless Mode

Set the camera to wireless flash mode when using an external flash in combination with the built-in flash.

1 Press the four-way controller (3).

The [Flash Mode] screen appears.

5

2 Select rand press the 4 button.

The camera is ready to take a picture.

Flash Mode

Wireless Mode

0.0

MENU Cancel

OK OK

the Using Flash

When the drive mode is set to i (Remote Control (3s delay)) or the lens aperture is not set to the sposition, r cannot be selected.

Changing the Built-in Flash Discharge Method

You can change the built-in flash discharge method used in wireless mode.

Set in [17. Flash in Wireless Mode] of the [ACustom Setting 3] menu (p.82).

1

On

Discharges the built-in flash as a master. (default setting)

 

 

 

2

Off

Discharges the built-in flash as a control flash.

 

 

 

HSb (High-speed flash sync) is not available with the built-in flash.