When the Wrong Language is Set

If you mistakenly select the wrong language in the [Language/u] screen and proceed to the [Date Adjustment] screen, you can perform the following operation to set the language back.

If you have proceeded to switch the camera to Capture mode (and the camera is ready to take a picture), perform the following operation from Step 2 to set the language back.

55

1

2

Press the 3button once to display the guides on the monitor.

The screen shown on the right is an example of the guides displayed. The displayed screen will vary depending on the selected language.

The guides appear on the monitor for 3 seconds.

Press the 3button once.

P

P

2009/01/01 00:00

2 GettingStarted

[A1] is displayed in the upper tab.

His displayed when the mode dial is set to H.

3 Press the four-way controller (5) five times.

[R1] is displayed in the upper tab.

Press the four-way controller (5) six times when the mode dial is set to H.

4 Press the four-way controller (3) to select [Language/ u].

5 Press the four-way controller (5). The [Language/u] screen appears.

6 Use the four-way controller (2345) to select the desired language and press the 4button.

The [RSet-up 1] menu in the selected language appears.

Refer to the following pages and set the desired city for [Hometown] and the current date and time as necessary.

•To change the hometown: “Setting the World Time” (p.244)

•To change the date and time: “Changing the Date and Time Display” (p.244)