Set the mode dial to b.

Using bMode

1

2 Use the e-dial to set the shutter speed.

The background is not properly exposed if the aperture value is blinking when the shutter speed is set. Adjust the shutter speed so that the aperture value does not blink.

3 Press the K/ibutton.

The built-in flash pops up.

4 Take a picture.

Using e/K/cMode

1 Set the mode dial to e, Kor c. 2 Press the K/ibutton.

The built-in flash pops up.

3 Press the four-way controller (3).

The [Flash Mode] screen appears.

4 Select Gor Hand press the 4button.

The shutter speed is set slower to give the proper exposure for the background.

5 Take a picture.

157

5

the Using

Flash