6 Playback/Deleting/Editing

Direct Printing Using PictBridge

By connecting the camera to a printer that supports PictBridge using the USB cable (I-USB7) supplied with the camera, you can print images directly from the camera without using a PC. Select the images you want to print and the number of copies on the camera after it has been connected to the printer.

•You are recommended to use the AC adapter D-AC5 (optional) while the camera is connected to the printer. The printer may not work properly or the image data may be damaged if the batteries run out of power while the camera is connected to the printer.

•The flash status lamp blinks slowly while data is being transferred from the camera to the printer.

•Do not disconnect the USB cable during data transfer.

•Depending on the type of printer, not all the settings made on the camera (such as image quality and DPOF settings) may be valid.

•Pictures may not be printed correctly when the camera is connected directly to a PictBridge-compatible printer if the total number of copies exceeds 500.

The camera will turn off automatically when you remove the USB cable.

Connecting the Camera to the Printer

1 Select [PictBridge] for [USB Connection] on the [BSet-up] menu.

1“Changing the USB Connection Mode” (p.128)

2 Connect the camera to the printer

 

 

 

 

 

 

 

 

 

 

using the USB cable supplied with

 

 

 

 

 

 

Print One

the camera.

 

 

 

Print All

The PictBridge menu appears.

 

 

 

 

 

 

Print w/ DPOF settings

 

 

 

OK OK

 

 

 

 

 

 

Do not connect the camera to your PC while [PictBridge] is selected for the USB connection mode.

See Step 4 in the “PC Connection Manual” if the camera has been connected to a PC while “PictBridge” is set.

108