3

2

1

Remote control unit E

(Remote control unit F has no zoom button.)

-dR +C .H =

Using the Remote Control Unit (optional)

You can switch the Drive mode to Remote Control mode and take pictures using the remote control unit for Pentax cameras (optional).

The remote control receiver is on the front of the camera. Stabilize the camera using a tripod, etc. and use the remote control unit pointing it towards the front (lens side) of the camera.

4 Taking

1 Press the four-way controller (2) in Capture mode to displayhor i on the LCD monitor.

The self-timer lamp blinks slowly and the camera is ready to take the picture.

2 Press the zoom button to adjust the zoom (for remote control unit E).

4

09/10/2005

10:25

Pictures

The zoom position changes each time the zoom button is pressed in the following sequence: tele  middle  wide

3 Press the shutter release button on the remote control unit.

h The picture is taken immediately.

iThe self-timer lamp blinks rapidly and the picture is taken after approximately three seconds.

•Focusing position may shift if you move the camera while the self-timer lamp is blinking.

•When the Focus mode is set to Super Macro mode, the zoom magnification does not change.

•The buttons on the camera can be used in the normal way.

•Ensure that the remote control unit is no more than four meters away from the front of the camera.

63