6 Take the first image.

11

Press the shutter release button to take the first image. The right edge of the image appears in semi-transparent form on the left of the LCD monitor.

OK

7 Move the camera to the right and

take the second image.

10

Move the camera until the semi-transparent image and the actual view overlap and press the shutter release button. Repeat

Steps 6 and 7 to take the third andOK subsequent images.

8 Press the OK button.

The screen returns to Step 5.

To cancel Panorama Assist Mode, temporarily change to another mode. However, when the Focus Mode is in z, you cannot switch Panorama Assist with the four-way controller (3). Use the Mode Dial to switch to another mode.

•The camera cannot join the images. Use the ACD Photostitcher function provided in the ACDSee for PENTAX software. Refer to “Photosticher Function” (p.23) in the “ACDSee for PENTAX User Guide” for instructions on creating panorama pictures.

•Continuous shooting is not possible in Panorama Assist.

4 TakingPictures

67