Pentax Model Optio S60 Taking Two-in-OnePictures (Two-in-OneMode)

1

5, 6 2, 3

4

+

Taking Two-in-One Pictures (Two-in-One Mode)

You can take two images in succession and place them side by side to form a single picture. The first image is positioned in the left half of the picture and the second image in the right half.

1	Set the mode dial to +.
2	Press the four-way controller (3).
3	The screen for choosing a digital effect mode appears.
	Use the four-way controller (23
4	45) to select == (Two-in-One).
	Press the OK button.
	The screen for taking the first image			Two-in-One
				Shoot area by
	appears.			halves & join
5							OK OK
	Take the first image.
						4
	Make sure that the subject is positioned in
	the left half of the screen and press the
	shutter release button.						Shoot
	When you have taken the first image, it						1st half
	appears semi-transparent in the left half of				09/10/2005
6	the picture.				10:25
	Take the second image.
						4
	Make sure that the subject is positioned in
	the right half of the screen and press the
	shutter release button.		Shoot
	When you have taken the second image,		2nd half
	the two images are combined to form one	09/10/2005
	picture and the screen returns to Step 5.
		10:25

To cancel Two-in-One mode, temporarily change to another mode. However, when the Focus Mode is in z, you cannot switch out of Two- in-One mode with the four-way controller (3). Use the Mode Dial to switch to another mode.

4 TakingPictures

65