2 QuickStart

Quick Start

Taking Still Pictures

Shutter release button

 

Power switch

Mode Dial

DISPLAY button

 

iDelete button

Zoom/f/y button

LCD monitor

 

The standard procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions.

1

2

3

4

Press the power switch.

The camera turns on.

Set the mode dial to R.

Check the image on the LCD monitor.

The focus frame in the middle of the LCD monitor indicates the zone of automatic focusing. You can change the captured area by pressing the Zoom/w/x button.

x: enlarges the subject.

w: enlarges the area captured by the camera.

Press the shutter release button halfway.

4

09/10/2005

10:25

Focus frame

The focus frame turns green if the subject is in focus.

5 Press the shutter release button fully.

The image appears on the LCD monitor for 0.5 second (Instant Review) and is recorded on the SD Memory Card or in the built-in memory. The green and red lamps on the upper part of the back of the camera blink alternately while the image is being recorded.

32