Troubleshooting

Problem

Cause

Remedy

 

 

Power will not

Battery is not installed

Check battery is installed. If

 

 

come on

 

not, install battery.

 

 

 

 

 

 

 

 

CF card cover is open

Close CF card cover.

 

 

 

 

 

 

 

 

Battery is installed

Check orientation of battery.

 

 

 

incorrectly

Reinsert the battery with the

 

 

 

 

label towards back of camera.

 

 

 

 

(p.11)

 

 

 

 

 

 

 

 

Battery power is low

Insert charged battery or use

 

 

 

 

the AC adapter.

 

 

 

 

 

 

 

No image on

LCD monitor is set to

Press Display button to turn

 

 

the LCD monitor

OFF

LCD monitor on. (p.34, p.79)

 

 

 

 

 

 

 

 

Image is displayed but

Image on LCD monitor may

 

 

 

is hard to see

be hard to see when taking

 

 

 

 

pictures outside in sunlight.

 

 

 

 

 

 

 

Shutter will not

Camera is set to

Press the Playback/OK button

 

 

release

Playback mode

or the shutter release button

 

 

 

 

halfway to set the camera to

 

 

 

 

Capture mode.

 

 

 

 

 

 

 

 

Flash is charging

When flash lamp blinks red,

 

 

 

 

flash is charging and no pic-

 

 

 

 

tures can be taken. Lamp

 

 

 

 

lights red when charging is

 

 

 

 

Appendix

 

 

completed.

 

 

 

 

 

 

 

 

 

 

No available space in

Insert CF card with available

 

 

 

built-in memory or on

space or delete unwanted

 

 

 

CF card

images. (p.14, p.81)

 

 

 

 

 

 

 

 

Recording

Wait until recording is fin-

 

 

 

 

ished.

 

 

 

 

 

 

 

127