vPress the shutter release button.

The image will be displayed on the LCD monitor for 0.5 seconds (Instant Review) and recorded on the CF card or in the built-in memory when no card is inserted. (The green and red lamps on the right of the viewfinder blink alternately while the image is being recorded.)

Using the Shutter Release Button

The shutter release button works in a two-step action.

●Press halfway

When the shutter release button is pressed lightly (halfway), the focus, exposure and white balance are locked. The shut- ter speed and aperture settings are only displayed when the shutter release button is pressed lightly (halfway).

You can find the following information on the LCD monitor, the status lamp and the flash lamp.

qFocusing area

If the subject is in focus, the frame will light green. If the

subject is not in focus, the frame will not appear.

wFlash symbol

The flash symbol indicates the status of the flash when the shutter release button is pressed.

Status lamp & Flash lamp (on the right of the viewfinder)

status

Status lamp (green)

Flash lamp (red)

lit

Subject is in focus

Flash is charged

blink

Subject is not in focus

Flash is charging

●Pressed down fully The picture is taken.

Instant Review

The Instant Review default setting is 0.5 seconds. During this

time you can delete the image by pressing the button (The Delete screen will be displayed.), and selecting [Delete].

Setting the Instant Review Time p.70

Start Quick

21