nWhen you have finished the settings, press the OKbutton when the clock reaches 00 seconds.

The camera is ready to take a picture.

When you set date and time except the initial settings, press the OK button again after pressing the OK button when the clock reaches 00 seconds to return to capture mode.

Caution • For an accurate time setting, when you have finished the settings, press the OK button when the clock reaches 00 seconds.

When the initial settings screen is displayed, you can cancel the settings operation and switch to Capture mode by pressing the MENU/Fn button. If this is done, the initial settings screen will be displayed next time you turn the camera on.

You can change the settings after they have been made. Refer to “Changing the Date/Time” (p.128).

Started Getting

23