Pentax Optio A20 Printing Using the Dpof Settings, Disconnecting the Camera from the Printer

Printing Using the DPOF Settings

1 Use the four-way controller (23) [DPOF setting].

2 Press the OK button.

The DPOF setting screen appears.

Use the four-way controller (45) to check the images and the print settings.

3 Confirm the number of copies, the setting of the date, and the print setting, and then start printing.

to select

		100-0010
Print with DPOF setting
Copies	5	Date
Total	10
MENU Cancel		OK Print

6 Playback/Deleting/Editing

To set the number of copies and the date imprint, refer to “Setting the Printing Service (DPOF)” (p.130). To print the images, refer to Steps 4 to 11 on “Printing Single Images” (pages 134 to 135).

Disconnecting the Camera from the Printer

Disconnect the camera from the printer when you have finished printing.

1 Turn the camera off.

2 Disconnect the USB cable from the camera.

3 Disconnect the USB cable from the printer.

If you disconnect the USB cable from the camera before you turn the camera off, the camera returns to Playback mode.

136