Shutter release button

Four-way controller

OK button

Reducing Camera Shake and Blurring in Pictures (Blur reduction Mode)

Blur reduction mode allows you to set the sensitivity higher than other modes to reduce camera shake and blurring. Shutter speed and aperture are set automatically according to the sensitivity value you set. Use the mode under the shooting conditions that the camera shake or blurring tend to occur.

1 Press the four-way controller (3) in Capture mode.

2

The Mode Palette appears.

 

 

 

Use the four-way controller

Blur reduction

 

(2345) to select

(Blur

 

 

3

reduction mode).

 

 

 

Press the OK button.

 

 

 

4

Press the shutter release button

MENU Cancel

OK OK

 

halfway.

 

 

 

The focus frame on the LCD monitor will light green when the camera is in focus.

5 Press the shutter release button fully.

The picture is taken.

The recorded pixels are fixed to 5M and cannot be changed.

When Sensitivity is set to AUTO, the sensitivity will automatically be set to maximum ISO 1600. The ISO Correction range can be set to maximum ISO 64-1600.(1p.92)

4 TakingPictures

67

Page 69
Image 69
Pentax Optio A20 specifications Blur reduction