Perle Systems 1S1P manual Installing Drivers and Host Cards

5.In the Device Manager window, click on the Multiport serial adapters icon to display the currently installed devices.

6.In the Device Manager window, double click on the device whose properties you want to view or change

The device Properties tabbed window is now displayed.

7.In the device Properties window, click on the Port Settings tab to display the Port Settings page.

8.In the Port Settings page, set the Port Number, Baud Rate, and any other configuration parameters you require.

DSR Always On—This feature is used for systems where the wiring does not support the DSR signal but the Host application still requires that the DSR be active. When the DSR Always On option is enabled, the driver will always report to the application that the DSR signal is "on".

Chapter 2 Installing Drivers and Host Cards

Page 22