Overview
This document contains instructions necessary for the installation and operation of the Perle C/CM-10GT Media Converter modules. These models are used in conjunction with a Perle Media Converter chassis. Each module contains one pluggable transceiver port that permits insertion of a SFP+ or a XFP fiber module and one integrated RJ-45 (copper) port. These media converter modules can use either Perle Systems or third party MSA compatible 10G XFP or SFP+ modules including support for the following standards: 10GBase-SR, 10GBase-LR, 10GBase- ER, 10GBase-LRM and 10GBase-ZR. The C/CM-10GT-SPF supports one low power transceiver (SFP+), whereas the C/CM- 10GT- XFPH supports one high power transceiver (XFP) (up to power level 4). These modules take two slots within a Perle Media Converter chassis
The C model modules are the unmanaged modules and the CM models are the managed modules. For information on the management options of the CM modules refer to the Perle MCR- MGT User’s Guide that came with your Perle Management Module. All combination of modules within the chassis cannot exceed the chassis power input consumption. The full power consumption for Perle Media Converter chassis can be found on the Perle website.
Model | Port 1 | Port 2 | Type |
| | | |
C-10GT-SFP | SFP+ | RJ-45 | unmanaged |
| | | |
CM-10GT-SFP | SFP+ | RJ-45 | managed |
| | | |
C-10GT-XFPH | XFP | RJ-45 | unmanaged |
CM-10GT-XFPH | XFP | RJ-45 | managed |
| | | |
Note: The C/CM-10GT-SFP media converter module can operate as a 1G media converter module if a 1G fiber transceiver has been inserted into the SFP+ transceiver port.
Visit Perle’s web site for the most up to date Installation guides, models and specifications: http://www.perle.com/
Perle C/CM-10GT Media Modules Installation Guide | 2 |
