Operation
Status LED
The
PWR
On – Power is on; module is operating normally
Blinking (slow) – The module is in Loopback mode.
Blinking (fast) – The module has a hardware failure.
FDF (fiber)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKF (fiber )
On – Fiber link is present. Off – No fiber link present. Blinking (slow) – Copper link down but fiber link appears functional. Blinking (fast) – Fiber link is up and receiving data.
100/1000 (copper speed) Green – 1000 Mbps Yellow – 100 Mbps.
Off – 10 Mbps (if link is present).
FDC (copper duplex)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKC (copper)
On – Copper link is present. Off – No copper link present. Blinking (slow) – Fiber link down but copper link appears functional. Blinking (fast) – Copper link is up and receiving data
Perle 10/100/1000 Media Converter Module – Instal lation Guide 13
