Perle Systems c-1111-xxxxx manual

P/N 5500308-20

Perle 10/100/1000 Ethernet

Media Converter

Module

Installation Guide

C-1110-XXXXX Unmanaged Module

CM-1110-XXXXX Managed Module

C-1110-SFP Unmanaged Module

CM-1110-SFP Managed Module

Contents

Main Overview http://www.perle.com/ Installation Auto-MDIX Jumper Auto-Config Jumper (CM-1110 only) Dip Switches Auto Negotiation copper (Switch 1) Link Mode (Switch 2) Fiber Fault Alert (Switch 3) Duplex copper (Switch 4) Speed copper (Switch 5) Fiber Negotiation (Switch 6) When using a 100 Mbit SFP module Full/Half Duplex on Fiber (Switch 6) Loopback (Switch 7) Installing or Replacing Media Converter Modules Removing Media Converter Modules Installing the SFP Fiber Module Installing the Duplex Fiber Cable Installing the Simplex Fiber Cable Installing the Copper Cable Operation Status LED The C(M)-1110 Module has six status LEDs located on the face plate of the module. Other Features Auto-MDIX Error Recovery Pause (IEEE 802.3xy) Troubleshooting General No connectivity Method 1 Method 2: Technical Specifications Fiber Optic Specifications Note 1: Fiber characteristics will vary by SFP Fiber module. Category 5 UTP or STP Fiber Cabling Requirements MM: 50/125 microns or 62.5/125 microns SM: 9/125 microns Ethernet Copper Cabling Requirements Compliance Information Warranty / Registration Contacting Technical Support