Speed copper (Switch 5)
Switch Position | Mode |
|
|
Up (default) | 100 |
|
|
Down | 10 |
|
|
Note When Auto Negotiation (SW1) is set to Off, the Media Converter Module will use this switch setting for its Ethernet copper speed setting.
Up: The Media Converter will be fixed at 100 Mbps.
Down: The Media Converter will be fixed at 10 Mbps.
Fiber Negotiation (Switch 6)
Switch Position | Mode |
|
|
Up (default) | Auto |
|
|
Down | Off |
|
|
Up: The Media Converter will negotiate Ethernet parameters on the fiber connection. This will ensure that the most optimal connection parameters will be in effect. If connecting to another Perle Media Converter, this parameter should be set to Auto. The Media Converter Module will advertise 1000Mbps, Full and Half Duplex, no Pause.
Down: The Media Converter Module’s fiber will be fixed to 1000Mbps, Full Duplex.
When using a 100 Mbit SFP module Full/Half Duplex on Fiber (Switch 6)
Switch Position | Mode |
|
|
Up (default) | Full |
|
|
Down | Half |
|
|
Up: The Media Converter Module will be set to Full Duplex mode on its fiber link.
Down: The Media Converter Module will be set to Half Duplex mode on its fiber link.
Perle 10/100/1000 Media Converter Module – Instal lation Guide | 9 |
