![](/images/new-backgrounds/1117798/11779851x1.webp)
Server Commands
session-escape-string
A configurable string that allows access to a port to view the multisession screen options, allowing the various options while accessing the particular port on the IOLAN. You can specify control (unprintable) codes by putting the decimal value in angle brackets < > (for example,
| retry |
| The number of times the IOLAN will retry to transmit a TPFT packet to/from a host |
| when no response is received. Enter a value between 0 and 5. The default is 5. A value |
| of 0 (zero) means that the IOLAN will not attempt a retry should TFTP fail. |
| timeout |
| The time, in seconds, that the IOLAN will wait for a successful transmit or receipt of |
| TFTP packets before retrying a TFTP transfer. Enter a value between 3 and 10. The |
| default is 3 seconds. |
| |
| This is the SSL/TLS passphrase used to generate an encrypted RSA/DSA private key. |
| This private key and passphrase are required for both HTTPS and SSL/TLS |
| connections, unless an unencrpyted private key was generated, then the SSL passphrase |
| is not required. Make sure that you download the SSL private key and certificate if you |
| are using the secure HTTP option (HTTPS) or SSL/TLS. If both RSA and DSA private |
| keys are downloaded to the IOLAN, they need to be generated using the same SSL |
| passphrase for both to work. |
Set SSL Server |
|
Description | Sets the default SSL/TLS parameters for the server. |
User Level | Admin |
Syntax | set ssl server [version anytslv1sslv3] [type clientserver] |
| |
| |
| country |
| organisation |
| |
Options | version |
Specify whether you want to use:
z
z
z
The default is Any.
type
Specify whether the IOLAN will act as an SSL/TLS client or server. The default is
Client. verify-peer
Enable this option when you want the Validation Criteria to match the Peer Certificate for authentication to pass. If you enable this option, you need to download an SSL/TLS certificate authority (CA) list file to the IOLAN.
26 | IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6 |