Authentication Commands
36 IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
Set Authentication KerberosSet Authentication LDAP
Description Configures Kerberos authentication settings.
User Level Admin
Syntax set authentication kerberos [kdc-domain <string>]
[port <TCP_port>] [realm <string>]
Options kdc-domain
The name of a host running the KDC (Key Distribution Center) for the specified realm.
The host name that you specify must either be defined in the IOLAN’s Host Table
(with an IP address) or be resolvable by a DNS server.
port
The port that the Kerberos server listens to for authentication requests. If no port is
specified, the default port 88 is used.
realm
The Kerberos realm is the Kerberos host domain name, in upper-case letters.
Description Configures LDAP authentication settings.
User Level Admin
Syntax set authentication ldap [base <string>]
[host <hostname/IP_addr>] [port <TCP_port>] [tls on|off]
[tls-port <TCP_port>]
Options base
The domain component (dc) that is the starting point for the search for user
authentication.
host
The name or IP address of the LDAP host. If you use a host name, that host must either
have been defined in the IOLAN’s Host Table (with an IP address) or be resolvable by
a DNS server. If you are using TLS, you must enter the same string you used to create
the LDAP certificate that resides on your LDAP server.
port
The port that the LDAP host listens to for authentication requests. The default port is
389.
tls
Enables/disables the Transport Layer Security (TLS) with the LDAP host.
tls-port
Specify the port number that LDAP will use for TLS. The default is port 636.