Perle Systems CSS - page 65

User Commands 63

Configuring Users

framed-compression

Used for User Service PPP or SLIP, determines whether Van Jacobsen Compression is

used on the link. VJ compression is a means of reducing the standard TCP/IP header

from 40 octets to approximately 5 octets. This gives a significant performance

improvement, particularly when interactive applications are being used. For example,

when the user is typing, a single character can be passed over the link with a packet as

small as 5 octets as opposed to 40 octets when no JV compression is used. VJ

Compression has little effect on other types of links, such as ftp, where the packets are

much larger. The Framed Compression value will be used in preference to the VJ

Compression value set for a Line. The default is Off.

framed-ip

Used for User Service PPP or SLIP, sets the IP address of the remote user. Enter the

address in dot decimal notation as follows:

z255.255.255.254 (default)—The IOLAN will use the Remote IP Address set in

the PPP settings for the line.

z255.255.255.255—When the User Service is PPP, the IOLAN will allow the

remote machine to specify its IP address (overriding the Remote IP Address

configured in the line, PPP settings). When the User Service is SLIP, the IOLAN

will use the Remote IP Address set for the line (no negotiation).

zn.n.n.n—(where n is a number) Enter the IP address of your choice. This IP

address will then be used in preference to the Remote IP Address set for a line.

framed-interface-id

Used for User Service PPP, sets the IPv6 address of the remote user.

framed-mtu

Used for User Service PPP or SLIP, specifies the maximum size of packets, in bytes,

being transferred across the link. On noisy links it might be preferable to fragment large

packets being transferred over the link, since there will be quicker recovery from errors.

Depending on whether you have selected a User Service of SLIP or PPP, details are as

follows:

zPPP—Framed MTU will be the maximum size of packets that the IOLAN port will

accept. This value is negotiated between the two ends of the link. The valid range is

64-1500. The default value is 1500 bytes.

zSLIP—Framed MTU will be the maximum size of packets being sent by the

IOLAN. The IOLAN will send SLIP packets in the range 256-1500 bytes. The

default value is 256 bytes.

The Framed MTU value will be used in preference to the MTU/MRU values set for a

Line.

Contents

Main Page Table of Contents Preface ...............................................................................15 Chapter 1 Introduction......................................................19 Chapter 2 Server Commands........................................... 21 Hardware Commands.................................................................29 SSH Server Commands .............................................................29 SSL/TLS Commands ..................................................................30 Modbus Commands ...................................................................33 Authentication Commands........................................................ 34 Page Chapter 3 User Commands ..............................................51 Commands for Users Logged Into the IOLAN......................... 51 Configuring Users ......................................................................58 Chapter 4 Line Commands...............................................67 Line Service Commands ........................................................... 76 Chapter 5 Network Commands...................................... 101 Page Chapter 6 Time Commands............................................121 Chapter 7 Administration Commands...........................127 Chapter 8 Statistics Commands ....................................133 Chapter 9 IOLAN+ User Commands.............................. 135 Chapter 10 I/O Commands .............................................137 Page Page Preface About This Book Intended Audience Typeface Conventions Contacting Technical Support Making a Technical Support Query Who To Contact Have Your Product Information Ready Making a support query via the Perle web page Repair Procedure Feedback on this Manual Page Introduction CLI Conventions Command Syntax Command Shortcuts can be typed as: or, you can use the ESC key to complete the lines as you go along: where the ESC key was pressed to complete the option as it was typed. Command Options Server Commands Server Commands Set Custom-App Set Console Set Port-Buffering Set Server Page Page Set SSL Server Set Service Show Console Show Custom-App Show Server Show Port-Buffering Show Modbus Hardware Commands Set Ethernet Show Hardware SSH Server Commands Set SSH-Server Show SSH-Server SSL/TLS Commands Set SSL Server Set SSL Server Cipher-suite Show SSL Modbus Commands Set Modbus Gateway Show Modbus Authentication Commands Set Authentication Set Authentication Local Set Authentication Kerberos Set Authentication LDAP Set Authentication NIS Add RADIUS Delete RADIUS Set Authentication RADIUS Set Authentication TACACS+ Set Authentication SecurID Show Authentication TruePort Baud Commands Show TruePort Set TruePort Remap-Baud Email Commands Set Email-Alert Server Show Email-Alert Server Clustering Commands Add Clustering Slave-IP Delete Clustering Slave-IP Set Clustering Slave-IP Show Clustering Slave-IP Dynamic DNS Commands Set Dynamic-DNS Set Dynamic-DNS SSL Page Set Dynamic-DNS SSL Cipher-Suite Show Dynamic-DNS PCI Commands Show PCI Set PCI Card Set PCI Wireless-WAN Show Wireless-WAN IPv6 Commands Set IPv6 Show IPv6 Add Custom-IPv6 Set Custom-IPv6 Delete Custom-IPv6 IPv6 Router Advertisements Set IPv6-Router-Advertisement Show IPv6-Router-Advertisement User Commands Commands for Users Logged Into the IOLAN Admin Help Kill Line Kill Session Logout Menu Ping Resume Rlogin Screen Set Termtype Set User Set User Session Show Line Users SSH Syslog Console Show Sessions Show Termtype Start Teln et Versi on Configuring Users Delete User Add User Set Default User Page Page Set User Page Page Page Set User Session Show Default User Show User Line Commands 1-Port vs. 2-Port+ Line Commands Line Commands Set Line Page Page Page Page Set Line Interface Set Line Service Page Page Set Modem Set Termtype Show Line Line Service Commands Set Custom-App Set Telnet-Client Set Rlogin-Client Set SSH-Client Page Set PPP Page Page Page Set PPP Dynamic-DNS Set SLIP Set UDP Set Vmodem Page Page Set Vmodem-Phone Set SSL Line Page Set SSL Line Cipher-suite Set Modbus-Slave Line Set Modbus-Master Line Set Power-Management Line Set Multihost Line Set Line Initiate-Connection Show Custom-App Show Interface Show Power-Management Page Modem Commands Add Modem Show Modems Delete Modem Set Modem Email Commands Set Email-Alert Line Show Email-Alert Line Packet Forwarding Commands Set Packet-Forwarding Line Page Page Page Page Network Commands SNMP Commands Add Trap Add Community Delete Community Delete Trap Set SNMP Set SNMP V3-Security Show SNMP TFTP Commands Delete Host Set Server TFTP Hosts Commands Add Host DNS/WINS Commands Add DNS Delete DNS Delete WINS Show DNS Show Server Show WINS Gateway Commands Add Gateway Delete Gateway Set Gateway Show Gateways Logging Commands Set Syslog Show Syslog RIP Commands Add RIP Delete RIP Set RIP Show RIP Show RIP Peers IPsec Commands Add IPsec Set IPsec Page Page Show IPsec IPsec IPv6 Tunnels Add IPv6tunnel Set IPv6tunnel Show IPv6tunnel Delete IPv6tunnel L2TP/IPsec Set L2TP Page Show LT2P VPN Exceptions Set VPN Exception Add VPN Exception Delete VPN Exception Show VPN Exception Time Commands Server Commands Set Time Set Timezone Show Time Show Timezone SNTP Commands Add SNTP Set SNTP Delete SNTP Show SNTP Show SNTP-Info Time/Date Setting Commands Set Date Set Summertime Set Summertime Fixed Set Summertime Recurring Show Date Show Summertime Page Administration Commands Bootup Commands Reboot Reset Reset Factory Save Set Bootup Show ARP Show Bootup TFTP File Transfer Commands Netsave Custom Factory Default Set Keys and Certificates Commands Netsave MOTD Commands Set MOTD Show MOTD Page Statistics Commands Configuration Statistics Show Netstat Statistics Show Netstat Show Modbus Statistics Run-Time Statistics Delete Arp Show Arp Show Serial Uptime Page Page I/O Commands Global I/O Commands Set IO UDP Set IO Failsafe Set IO Modbus Set Line Set IOChannel Set IOChannel Mode Set IOChannel Digital I/O Set IOChannel Digital Input Set IOChannel Digital Input (Serial Pins) Set IOChannel Digital Output Set IOChannel Digital Output (Serial Pins) Set IOChannel Relay Set IOChannel Analog (True Analog) Set IOChannel Analog (Temperature) Page Set IOChannel IOExtension Page Set IOChannel Multihost Set IOChannel IOExtension SSL Show IOChannel Status Kill IOChannel Show IO Show IOChannel Digital Output I/O Channel Control Commands Digital Input Relay Analog Input Calibrating Analog Input (Analog/Temperature) Calibrate Analog Reset Calibration Page Power Commands Power Commands Page Glossary