29
Commands for Users Logged Into the IOLAN
Show Line Users
Description Shows the users who are on the line.
User Level Admin
Syntax
Syslog Console
Description Starts/stops or displays the status of the syslog console.
User Level Admin
Syntax
Options start|stop
Start or stop console logging. When console logging is enabled, syslog messages will
be echoed to the current console. These messages are filtered based on the level set in
the (remote) syslog options.
status
Displays the current console logging status (enabled or disabled).
Show Sessions
Description Shows available sessions.
User Level Restricted, Normal, Admin
Syntax
Show Termtype
Description Shows the terminal type for the current session.
User Level Admin
Syntax
Start
User Level Normal, Admin
Syntax set user . session 1|2|3|4|* [auto on|off] [type off|telnet]
set user . session 1|2|3|4|* telnet-options [host <config_host>]
[port <TCP_port>] [termtype <terminal_name>] [line-mode on|off]
[map-cr-crlf on|off] [local-echo on|off] [echo <00-7f>]
[eof <00-7f>] [erase <00-7f>] [intr <00-7f>] [quit <00-7f>]
Options session
Specifies the session number (or all, *) that you are configuring.
auto
Specify whether or not the session(s) will start automatically when the user logs into the
IOLAN.
telnet-options
See Set Telnet-Client in the IOLAN User’s Guide.
show line <number> users
syslog console start|stop
syslog console status
show sessions
show termtype
Description Starts a predefined session. Only inactive sessions are displayed.
User Level Restricted, Normal, Admin
Syntax start 1|2|3|4