19
Server Commands
Set Service
Description Sets server service parameters.
User Level Admin
Syntax
Options telnetd
httpd
snmpd
spcd
syslog
dmgrd
modbusd
Show Custom-App
Description Shows the custom application server settings.
User Level Admin
Syntax
Show Modbus
Description Shows the Modbus settings for the gateway.
User Level Normal, Admin
Syntax
Show Server
pre-4.3g data-logging
Enable the data logging feature previous toV4.3 firmware.
Default: Disabled
udp-always-arp
This controls whether the IOLAN will attempt an ARP each time there is data to be
transmitted and the ARP table does not have a valid ARP entry for the destination.
When set to "off", a new ARP will only be attempted after a timeout period. Any data
to be sent before the timeout elapses, will be silently discarded.
Default: Off
set service [telnetd on|off] [httpd on|off] [snmpd on|off]
[spcd on|off] [syslog on|off] [dmgrd on|off] [modbusd on|off]
Telnet daemon process in the IOLAN on port 23.
HTTP daemon process in the IOLAN on port 80.
SNMP daemon process in the IOLAN on port 161.
SPC (Trueport) daemon process in the IOLAN on port 668.
Syslog client process in the IOLAN.
DeviceManager daemon process in the IOLAN. If you disable this service, you will not
be able to connect to the IOLAN with the DeviceManager application.
DeviceManagerD listens on port 33812 and sends on port 33813.
Modbus daemon process in the IOLAN on port 502.
show custom-app server
show modbus gateway
Description Shows the parameters set for the server.