INSTALLATION AND OPERATION INSTRUCTIONS
BEER DISPENSERS
IMPORTANT INFORMATION
Fill out the enclosed warranty card and mail to the Perlick Corporation to register the warranty. If the card is not returned, the warranty period will begin from the date the equipment is shipped from the factory.
This manual has been prepared to assist you in the installation of your Direct Draw Dispenser and to acquaint you with its operation and maintenance.
We dedicate considerable time to ensure that our products provide the highest level of customer satisfaction. If service is required, your dealer can provide you with a list of qualified service agents. For your own protection, never return merchandise for credit without our approval.
We thank you for selecting a Perlick product and assure you of our continuing interest in your satisfaction.
WARNING: When lifting, the full weight of the cabinet must be supported. Lift from the cabinet base and not from the top. Improper lifting can result in severe damage to the cabinet.
MODEL NOS.
H Series
Table of Contents |
|
Cabinet Specifications | 2 |
Preparing the Cabinet | 3 |
Placing the Cabinet | 3 |
Cleaning the Cabinet | 4 |
Cleaning the Condenser | 4 |
Temperature Conrol | 4 |
Installing the Dispensing Head | 5 |
Connecting the CO2 Cylinder | 6 |
Replacing a CO2 Gas Cylinder | 7 |
Handling CO2 Gas | 7 |
TEMPERATURE |
|
Beer Temperature | 7 |
CLEANING |
|
Cleaning the Beer Lines | 8 |
GENERAL INFORMATION |
|
Troubleshooting | 9 |
Door Switching Instructions | 10 |
Tap Mounting Hole Location | 11 |
Pouring a Perfect Glass of Beer | 12 |
Low Profine Coupler | 13 |
Keg Capacity and Location | 14 |
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone
Toll Free
Form No. Z2259 Rev. 11.22.06
