Regulatory Information
PHILIPS
109E5*
This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94. Time settings are adjusted from the system unit by software.
NUTEK | VESA State | LED Indicator | Power Consumption |
Normal operation | ON (Active) | Green | Typical 65W |
Power Saving |
|
|
|
Alternative2 | OFF (Sleep) | Flashing Green | < 1W |
One Step |
|
|
|
| Switch Off | Off | < 1W |
As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
We recommend you switch off the monitor when it is not in use for quite a long time.
RETURN TO TOP OF THE PAGE
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
file:///D/EDFU/crt_19_5/edoc/french/109E/SAFETY/REGS/REGULAT.HTM (8 of
