Philips 150X user manual INPUT SELECTION not available on all monitors, Return To Top Of The Page

The OSD Controls

RETURN TO TOP OF THE PAGE

INPUT SELECTION (not available on all monitors)

INPUT SELECTION allows you to decide whether the video input into your monitor comes from a digital or analog source. This is determined by how the video signal is sent from your computer to your monitor.

To find out if the signal is digital or analog, first consult the owner's manual for your computer. Second, make sure you have the correct connection made to your monitor. If your computer supports both analog and digital output, you can also use this setting to switch between the two video signals as desired.

1)Press the OK button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is highlighted.

2)Press the button until INPUT SELECTION is highlighted.

3)Press the button. The INPUT SELECTION window appears.

4)Press the or button to select either ANALOG or DIGITAL.

file:///D/Philips LCD/english/150X/OSD/OSD_CONT.HTM (16 of 18) [4/18/2001 9:13:20 AM]