Philips 150X user manual Audio

150X Product Information
• Sync input signal	Separate sync
	Composite sync
	Sync on green
• Sync polarities	Positive and negative
	XGA Hsync	48- 60 KHz, Vsync 60 - 75 Hz (N.I.)
• Input Frequency	SVGA Hsync	35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
	VGA Hsync	31- 38 KHz, Vsync 60 - 75 Hz (N.I.)
• Video interface	Dual input: It can be switching via OSD selection. DVI-I
	(Integrated) interface, which both provides analog and digital
	inteface.

AUDIO

• Input signal levels	0.7 Vpp
• Headphone out signal level	32 Ohm 20 + 20 mW
• Input signal connector	3.5mm mini jack
• Loudspeakers	2 + 2 W stereo front firing (PMPO 36W)

MICROPHONE

• Sensitivity	-55dB re 1V/ubar at 1 KHz
• Output impedance	2.2K Ohm max
• Directivity	-5dB at 180°
• Frequency range	300Hz~3KHz

OPTICAL CHARACTERISTICS

• Contrast ratio	350(typ.)
• Brightness	250 cd/m2 (typ.)
• Peak contrast angle	6 o'clock
• White Chromacity	x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)
	Upper >70 ° (typ.)
• Viewing Angle (C/R >5)	Lower >70° (typ.)
	Left >80 ° (typ.)

Right >80 ° (typ.)

• Response time <=45ms (typ.)

* These information are subject to change without notice.

file:///D/Philips LCD/english/150X/PRODUCT/PRODUCT.HTM (2 of 9) [4/18/2001 9:12:31 AM]