7. Installation | Connecting to an external monitor |
|
|
Connecting to an external monitor
Note: The characters in brackets (a) correspond to characters in fig. 4 of ‘Controls and connections’.
Caution!
Always switch off PC, external monitor and projector before making any connections.
Monitor cable
(optional)
1. Connect the Data out terminal of the computer to the Data in |
|
|
|
|
terminal (g) of the projector and secure the plugs by |
|
|
| (g) |
tightening the thumb screws. |
|
|
|
|
For this, use the VGA/USB cable (1) supplied. | Video | DataDataoutin | DataDataoutin | |
o in RL | ||||
When connecting the projector to a Macintosh computer use |
|
|
|
|
the VGA/MAC adaptor (optional). |
|
|
|
|
2.Connect the Data out terminal (f) of the projector to the
external monitor and secure the plugs by tightening the thumb screws.
For this, use an optional monitor cable.
To obtain the audio signal on the monitor instead of on the projector:
•Connect the Audio in sockets of the monitor to the Audio out socket (a) of the projector.
•Insert the white plug into the L socket and the red plug into
the R socket.
Some monitors have a single Audio in socket for which a different audio connection cable with a 3.5 mm mini jack is required.
Notes:
–One external monitor or projector can be connected at a time.
–For further details on the operation with
On Screen Displays see chapter ‘8 Operation’.
Projector
(1)
Mac/PC
(optional)
USB | Dataataoutt | Audioio outt |
|
14
