Philips 20MC4304, T2132 Remote Control Battery Installation, Battery Safety, Recording Prevention

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 8

8 Before Using the TV/VCR/DVD

Remote Control Battery Installation

	Remove the battery compartment lid on the
	bottom of the remote control. Slide the lid down and
1 off. Follow the direction of the arrow on the lid.
2	Place two AA batteries inside the battery
	compartment. Align the + and – ends as indicated.
3 Replace the battery compartment lid.

Battery Safety

Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage or damage to the unit:

●Install ALL batteries correctly, with the + and – markings on the battery aligned as indicated on the unit;

●Do not mix batteries, for example, old with new or carbon with alkaline; and

●Remove batteries when the unit will not be used for a long time.

Recording Prevention

Videotapes have record tabs to ensure you do not erase recordings accidentally.

1 To prevent accidental recording, break off the tab with a screwdriver.

2 To record again, cover the hole with cellophane tape.

Using the Remote Control

●Point the remote control at the remote sensor on the front of the TV/VCR/DVD. Details are on page 17.

●Do not put objects between the remote control and the TV/VCR/DVD.

TV/VCR/DVD Maintenance

●Remove any light adhesive stick-on notes from the video cassette before putting the cassette in the TV/VCR/DVD. Removable labels can jam the TV/VCR/DVD.

●The TV/VCR/DVD requires periodic maintenance to maintain its excellent performance.This TV/VCR/DVD has an internal head cleaning system. However, the video heads will eventually require cleaning or replacement. Only an authorized service center should perform this service.

1 2 3

12

Helpful Hint

•Your new product, its packaging and this manual contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount that needs to be properly disposed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste.

Please find out about the local regulations on disposal of your old product, batteries, manual and packaging when you replace existing equipment.