Philips 21PV708-715-908/39 manual Programmed Recording Timer, ’PDC’ Programme Delivery Control

7.PROGRAMMED RECORDING (TIMER)

Use programmed recording to automatically start and stop a recording at a later date.

To make a programmed recording, your TV-VIDEO Combi needs to know:

*the date you want to make the recording;

*the programme number for the TV channel you want to record;

*the start and stop time of the recording;

*whether you want to use VPS or PDC;

*the recording speed (SP/LP).

The TV-VIDEO Combi stores all the information in a TIMER block. You can programme up to 6 TIMER blocks a month in advance.

’VPS’ (Video Programming System) and

’PDC’ (Programme Delivery Control)

With ’VPS and PDC’, the TV station controls the start time and the length of the recording. This means that the TV-VIDEO Combi switches itself on and off at the right time even if a TV programme you want to record begins earlier or finishes later than expected.

Usually the start time is the same as the VPS or PDC time. But if your TV guide gives a VPS or PDC time which is different to the programme’s start time (for example, 20.15 and VPS 20.14), you must enter ’20.14’ as the start time.

If you want to programme a time that is different from the VPS or PDC time, you must switch off VPS or PDC.

Programming a recording (with ’SHOWVIEW’)

All the important information needed for a programming is contained in the SHOWVIEW-programming number.

a Press the TIMER button on the remote control.

bSelect the line ’ShowView’ with the menu buttons

} or z and confirm with the button.

cEnter the entire SHOWVIEW-number (up to 9 digits) printed in your TV guide next to the start time of a TV programme.

For example, 5-234-89 or 5 234 89

Enter 523489 for the SHOWVIEW-number.

If you make a mistake, you can clear your instructions with the CLEAR button.

ShowView

CODEREPEAT

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

1 2 3 4 5 6( ( ( ONCE

0-9	Store:
	press OK

dIn line ’REPEAT’ select the kind of programming required with the } or z button.

’ONCE’: recording only once

’Mo-Fr’: recordings every day from Monday to Friday.

’Mo-Su’: recordings every day from Monday to Sunday.

’WEEKLY’: recordings every week on the same day of the week.

eConfirm with the OK button. Your programming details will then appear on the TV screen.

TIMER PROGRAMMING

VPS

DATEPROG. START END LP PDC REP.

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

15 xxx 15:36 15:50 - * ONCE

Store: press OK

If SHOWVIEW does not recognise the TV channel, ’P??’ will appear on the TV screen. Instead of ’P??’, you can select the programme number (programme name) you want with the number buttons 0-9 .

If ’Code error’ appears on the TV screen, this means you entered an incorrect SHOWVIEW-code number or the incorrect date. Correct your instructions or end with the TIMER button.

If ’Daily error’ appears on the TV screen, the date was incorrectly entered.

Under ’VPS/PDC’, use the } or z button to switch ’VPS or PDC’ on or off.

17