Philips 21PV708-715-908/39 manual Installing Your TV-VIDEO Combi, Initial installation

2.INSTALLING YOUR TV-VIDEO COMBI

Initial installation	’Time’, ’Year’, ’Month’, ’Date’ will appear on the
	TV screen.

aOpen up the battery compartment of your remote control and place the batteries in it as shown in the picture.

bClose the battery compartment.

cSelect the language for the on-screen display (OSD) with the } or z button.

dConfirm with the OK button.

e Select the country of your residence with the } or

zbutton.

If this country does not show up, select ’OTH.’.

fConfirm with the OK button.

gIf the aerial (antenna) has been connected to the TV-VIDEO Combi, press the OK button.

’Automatic TV channel search’ starts. This picture will appear on the screen:

Autostore ready
CHANNELS FOUND:	08
Time	15:36
Year	2000
Month	06
Date	08

Exit: press MENU

hCheck if the time in line ’Time’ is correct. If required,

change the time with the number buttons 0-9on your remote control.

iCheck ’Year’, ’Month’ and ’Date’ in the same way.

You can switch between entry fields with } or z button.

j Confirm the new information with the OK button. The initial installation is now complete.

If you have connected a decoder, you must install it as described in the next section.

If you have connected a satellite receiver, please read the section ’satellite receiver’.

Searching...

CHANNELS FOUND:

//////,,,,,,,,,,,,,,,,,,,,,

Wait until all TV channels have been found. This can take several minutes.

Allocating a decoder

Some TV stations will send coded TV channels, that you can only watch when you use a decoder. You can connect such a decoder (descrambler) to your TV-VIDEO Combi. With the following function, the connected decoder will automatically be activated for the TV programme you want to watch.

aSelect the TV channel for which you want to use the

decoder with the	P		button on the TV-VIDEO Combi
or the number buttons				on the remote control.
		0-9

bPress the MENU button on the remote control. The main menu will appear.

c Select the line ’Installation’ with the		} or
z button and confirm with the	button.
d Select the line ’Manual store’ with the		} or
z button and confirm with the	button.

5