Philips 21PV708-715-908/39 Digit button 2 at the same time to switch the remote, At the same

Switching the internal speakers on or off Switching the remote control command

If you want to connect a HiFi-stereo set or a ’Dolby Pro Logic’ decoder to the socket AUDIO OUT L/R (audio output left/right) and switch off the internal speakers, proceed as follows:

aPress the MENU button. The main menu will appear.

b Select the line ’Setup’ with the } or z button and

confirm with the button.

SETUP
Parental control	OFF
Display	MAX
Format 16:9	NORMAL
Speakers	ON
Sound only	ON
VCR 1/2	VCR 1

Exit: press MENU

c Select the line ’Speakers’ with the } or			z .
d In the line ’Speakers’ select ’OFF’ with the			or
button.
e Confirm with the	OK button.
f To end, press the		button.
	MENU

If you want to switch the speakers on again, select ’ON’ in line ’Speakers’.

If you have two machines with the same remote control command, you can change the remote control command of the handset and the remote control command of your TV-VIDEO Combi.

aPress the MENU button. The main menu appears.

b Select the line ’Setup’ with the menu buttons } or

z and confirm with the menu button .

SETUP
Parental control	OFF
Display	MAX
Format 16:9	NORMAL
Speakers	ON
Sound only	ON
VCR 1/2	VCR 1
Exit:
press MENU

c Select the line ’VCR 1/2’ with the menu buttons }

or z .

d Select ’VCR 1’ or ’VCR 2’ with the menu buttons

or .

e Confirm with the			OK	button.
f On the remote control, press the							button and the
						STOP
digit button 2 at the same time to switch the remote
control to ’VCR 2’.
	If you want to switch back to ’VCR 1, press the
		button and the digit button					1 at the same
	STOP
	time.
g Confirm with the					button.
			STOP

hTo end, press the MENU button.

After you changed the batteries in the remote control, it will switch back to ’VCR 1’.

If e.g.: ’VCR 1’ appears on the TV screen after pressing a button for a few seconds, you must switch the remote control to ’VCR 2’.

23