Philips 21PV708-715-908-918/39 manual Switching the On-screen display OSD on or off

Switching the On-screen display (OSD) on or off

You can switch the On Screen Display of the current operating information on or off.

aPress the MENU button. The main menu appears.

b Select the line ’Setup’ with the menu buttons } or

z and confirm with the button.

Switching to 16:9 wide screen picture

If you are using a cassette with 16:9 wide screen recordings, you can switch this function ’ON’. The TV-VIDEO Combi will now automatically switch to wide screen.

aPress the MENU button. The main menu appears.

b Select the line ’Setup’ with the } or z button and

confirm with the button.

SETUP		SETUP
Parental control	OFF	Parental control	OFF
		Display	MAX
Display	MAX	Format 16:9	NORMAL
Format 16:9	NORMAL
		Speakers	ON
Speakers	ON
		Sound only	ON
Sound only	ON
		VCR 1/2	VCR 1
VCR 1/2	VCR 1
Exit:		Exit:
		press MENU
press MENU

c Select the line ’Display’ with the menu buttons } or z .

dSelect one of the options indicated with the menu buttons

or .

’MAX’: The OSD appears for a few seconds each time an operating mode is selected and then disappears.

’MIN’: The OSD is reduced to a minimum.

’PROGR.’: The programme number is always shown.

’COUNTER’: The tape position is always shown.

eConfirm with the OK button.

fTo end, press the MENU button.

With the OK button you can superimpose the On Screen Display of current operating mode on the TV screen.

cSelect the line ’Format 16:9’ with the z or } button.

d Select one of the possibilities with the	or	button.
’NORMAL’ : Normal size picture.
’EXTEND.’ : Extended size picture.
’COMPR.’ : 16:9 format picture.

When you watch TV you can select between ’EXTEND.’ and ’NORMAL’.

eConfirm with the OK button.

f To end, press the MENU button.

22