Special installation functions
You can select one of the following installation functions in order to adapt your
Automatic TV channel search
Your
If you want to start the automatic TV channel search again, then follow the instructions below.
aPress the MENU button on the remote control. The main menu will appear.
b Select the line ’Installation’ with the | } or | ||
z button and confirm with the | button. |
| |
c Select the line ’Autostore’ with the } or z | |||
button. |
|
|
|
d Press the | button. |
|
|
e Select the country you are in with the } or | z button. | ||
If your country doesn’t show up, select ’OTH.’.
fConfirm with the OK button. The ’Automatic TV channel search’ starts.
Searching...
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
gWhen the TV channel search is complete,
’Autostore ready’ will appear on the screen.
’Time’, ’Year’, ’Month’, ’Date’ will appear on the TV screen.
Autostore ready |
|
CHANNELS FOUND: | 08 |
Time | 15:36 |
Year | 2000 |
Month | 06 |
Date | 08 |
Exit: press MENU
hCheck if the time in line ’Time’ is correct. If required,
change the time with the number buttons
iCheck ’Year’, ’Month’ and ’Date’ in the same way.
Switch between the entry fields with the } or z button.
j Confirm each line with the OK button.
How to search for a TV channel manually, you can read in the section ’Manual TV channel search’.
If you have programmed a recording (TIMER), a
Automatic Channel Installation:
Some cable companies or broadcasters offer the possibility to install TV channels automatically with ’ACI’. Information about the installation offered and how to select it, will appear on the screen.
This set will recognize and install TV channels with ’ACI’ automatically.
TV channels will be stored from programme number 1 onward.
If ’ACI’ cannot identify a TV channel, you can search for it using the method as described in the section ’Manual TV Channel Search’.
7
