Power on light is too strong and is Disturbing

Horizontal flicker appears

•Adjust the image using the “Auto” function in OSD Main Controls.

•Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.

Image appears blurred, indistinct or too dark

•Adjust the contrast and brightness on On- Screen Display.

An "after-image", "burn-in" or "ghost image" remains after the power has been turned off.

•Uninterrupted display of still or static images over an extended period may cause " burn in", also known as "after-imaging " or "ghost imaging", on your screen. "Burn-in", "after- imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off.

•Always activate a moving screen saver program when you leave your monitor unattended.

•Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.

•Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired.The damage mentioned above is not covered under your warranty.

Image appears distorted.Text is fuzzy or blurred.

•Set the PC’s display resolution to the same mode as monitor’s recommended screen native resolution.

Green, red, blue, dark, and white dots appears on the screen

•The remaining dots are normal characteristic of the liquid crystal used in today’s technology, Please refer the pixel policy for more detail.

The "power on" light is too strong and is

disturbing

•You can adjust “power on” light using the power LED Setup in OSD main Controls.

Audio problem

No sound

•Check if audio cable is connected to PC and monitor correctly.

•Ensure audio is not muted. Press OSD “Menu”, select “Audio” then “Mute”. Check it on “Off” position.

•Press “Volume” in OSD main control to adjust the volume.

USB problem

USB peripherals are not working

•Check if USB upstream cable is connected to your monitor correctly

•Turn your monitor OFF and ON once again. You may need to install/reinstall USB drivers in your PC and ensure hub is active.

•Reconnect your USB peripherals

For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.

220BL2, 220B2CS/00, 220B2 specifications

The Philips 220BL2, 220B2, and 220B2CS/00 series of monitors are designed for performance, ergonomics, and sustainability, making them an excellent choice for both professional and home office settings. These monitors feature a 21.5-inch display with Full HD resolution (1920 x 1080 pixels), ensuring that users can enjoy crisp, clear visuals, whether for work or leisure.

One of the standout technologies in this series is the IPS panel, which offers wide viewing angles of up to 178 degrees. This characteristic significantly enhances color consistency and image quality, allowing users to view the screen from different angles without any degradation in performance. The brightness level of up to 250 nits, along with a contrast ratio of 1000:1, provides vibrant colors and deep blacks, contributing to an overall excellent viewing experience.

Ergonomics is a crucial feature of the Philips 220 series monitors. They are equipped with various tilt and height adjustment options, allowing users to customize their viewing position for maximum comfort. This adjustability helps to reduce neck and eye strain during long hours of work, promoting better posture and improving productivity.

Moreover, these monitors are designed with energy efficiency in mind. They comply with Energy Star 7.0 and TCO Certified, which means they consume less power without compromising performance. The SmartPower technology further optimizes energy consumption by automatically adjusting brightness levels based on the content being displayed, contributing to lower energy costs and a reduced carbon footprint.

Connectivity is another feature that enhances the usability of the Philips 220 monitors. They come with a variety of ports, including DisplayPort, VGA, and HDMI, providing flexibility in connecting to various devices like laptops, desktop computers, and gaming consoles.

In summary, the Philips 220BL2, 220B2, and 220B2CS/00 monitors combine impressive technological features with a focus on ergonomics and sustainability. With their high-resolution displays, innovative IPS technology, energy-efficient designs, and a range of connectivity options, they cater to the diverse needs of modern users, whether for work, study, or entertainment. The Philips 220 series stands as an ideal solution for those seeking reliability and quality in their display technology.

Philips 220B2 Power on light is too strong and is Disturbing, Reconnect your USB peripherals

Models: 220BL2 220B2CS/00 220B2