Philips 221P6, 221B6 user manual Remove the Base Assembly for VESA Mounting

2. Setting up the monitor

2.3Remove the Base Assembly for VESA Mounting

Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.

1.Extend the monitor base to its maximum height.

2.Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.Then lift the monitor stand.

3.While keeping the release button pressed, tilt the base and slide it out.

Note

This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation.

100mm

100mm

10