2 Press
or 
to select the channel you want to remove, then press OK.
2 Press a number (1 to 135) to enter the number of the channel you want to add, then press OK.
10
PICTURE
SOUND
SETUP
FEATURES
LANGUAGE
Highlight channels for Ch Up/Down key selection.
Ch Select | OK Watch/Skip |
DTV 40.1 
DTV 40.2
DTV 40.3
BACK Back
PICTURE
SOUND
SETUP
FEATURES
LANGUAGE
For analog channels, select a channel to be added using number keys.
For digital channels, you must perform Autoprogram function.
Add channels
•The channel display for the removed channel darkens.You will not be able to select the channel again using CH
•To reactivate a removed channel, press 
or 
and press OK. The registered channels are highlighted.
•When you remove a major channel, its minor channels are removed as well.
Note
•The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC.
3 Press MENU to exit.
Add Channels
This function lets you add the channels that were not added by the autoprogram due to the receptible condition at the initial setup.
1 Press MENU on the remote control and [SETUP] > [Add Channels].
PICTURE | Autoprogram | ||||||||
SOUND | Channel List | ||||||||
|
|
|
|
|
|
|
|
|
|
SETUP | Add |
|
| Channels | |||||
FEATURES | Antenna | ||||||||
LANGUAGE |
|
|
|
|
|
|
|
|
|
Ch Change | BACK Back |
3 Press MENU to exit.
Note
•If setup completes successfully, [Added to the channel list] is displayed.
•If external input is used, it is not possible to register the channel and [Unavailable] will be displayed on theTV screen.
•By pressing 
or 
, you can select the memorized channels only.
Optimize the Signal Quality from Your Antenna
You can optimize your signal quality by tuning in ATSC channels with weak signals, and adjusting the antenna.
1 Press MENU on the remote control and select [SETUP] > [Antenna].
2 Press OK to confirm your choice.
3 Press a number (1 to 135) or press CH+ or CH- to select the channel for which you want to check the digital signal strength.
4 Press MENU to exit.
22EN
