1
BASIC ANTENNA AND CABLE CONNECTIONS
Your home’s signal input might come from a single (75 ohm) round cable, a
Converter Box, or from an antenna. In either case the connection to the TV is very easy.
1If your Cable TV signal or Antenna signal is a round cable
(75 ohm) then you're ready to con- nect to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
If you have a Cable Converter
Box: Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.
2Connect the Cable TV cable or Antenna cable (or 300 to 75 ohm adapter) to the 75Ω plug on the TV.
If you have a Cable Converter
Box: Connect the OUT(put) plug from the Converter to the 75Ω plug on the TV.
Antenna Connection
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
300 to 75Ω |
| Back of TV |
Adapter |
|
|
1 | 75 | 2 |
Twin Lead |
|
|
Wire |
|
|
Round Cable |
|
|
75Ω |
|
|
Direct Cable Connection
Cable signal coming from Cable Company
HELPFUL HINT
After using the AutoProgram Control, press the CH + and – buttons to scroll through all the channels stored in the television’s memory.
1
75Ω Round
Coaxial Cable
Back of TV
75
Jack Panel Back of TV
