QUADRASURF
The QuadraSurf buttons on the remote control allow you to store up to 10 channels per button (40 in total). You can program the AV input channels for each button making them a “source” button.
Assuming channels have been added to the four Quadra Surf lists (the four colored buttons, see previous page).
1
2
3
4
5
Press one of the 
with the first programmed channel for that surf list.
While the colored SMILEY 
STILL appears on the screen, press the same COLORED
button on the remote control to tune to the second channel programmed for that surf list.
Pressing the same COLORED button
while the SMILEY 
appears will tune all the programmed channels. Pressing the COLORED button again will return you to the first channel in the list.
After the SMILEY 
disappears from the screen and the same COLORED button is pressed, the surf channels will be displayed starting with the FIRST programmed channel again.
Repeat steps 1 - 3 for the other three COLORED buttons (Surf list) if desired.
Pressing the FROWNIE 
button on the
remote control while the SMILEY 
appears with the channel number will allow you to remove it from the surf list (see previous page for more details).
10 | 12 |
99 | 18 |
56 | 22 |
| |
41 | 28 |
39 | 35 |
QUADRASUFR
SMILEY
FROWNIE
VOL
12 | Remove Item? - Press |
A/CH (ALTERNATING CHANNELS)
Your remote control has an A/CH (Alternate Channel) button which allows you toggle between the current channel ou are watching and the previous channel.
1 | Press A/CH on the remote control to toggle | 5 |
12 | ||
|
| |
| between the current and previous channel. | A/CH |
VOL
33
