18
Dolby* Pro Logic Install
4Select Dolby Pro Logic Install with the keys Wor Vand press OK.
5The DOLBY PRO LOGIC INSTALL menu appears and Test lights up.
Most programmes will sound good with the volume balance between the
centre, left and right and rear loudspeakers in an equally loud position.
Which loudspeakers are active depends on the selection you have made in the
TV-Configuration menu, p. 10.
4Select Surround Mode with the keys Wor V.
4Press the keys Cor Bto select Pro Logic.
4Select Test again with the keys Wor V.
4Press the keys Cor Bto switch Test on.
5A steady noise tone is switched sequentially through the left, centre, right and
rear loudspeakers, for 2 seconds each. This enables you to adjust the volume
of the separate loudspeakers.
The loudspeakers activated light up in the on screen graphic.
4Select with the keys Wor VCentre Volume, Balance or Rear Volume.
5The selected adjustment lights up.
4Press the keys Cor Bto alter the selected adjustment.
4Select Test again with the keys Wor V.
4Press the keys Cor Bto switch Test off again.
Surround mode
4Select Surround Mode with the keys Wor V.
5Surround Mode lights up.
4Press the keys Cor Bto select the preferred surround mode : Pro Logic,
Dolby 3 Stereo, Hall or Off.
Pro Logic (with Dolby Surround broadcasting)
5In addition to the left and right front speakers, the centre and the rear
surround loudspeakers reproduce the Dolby Surround Pro Logic sounds.
This 4-channel sound is always recorded when the movie or programme is
marked with Dolby Surround.
This mode is especially recommended for such programmes or movies.
Dolby 3 Stereo (with Dolby Surround broadcasting)
5The Dolby 3 Stereo sound signal is now distributed over the front left, the
front right and the centre loudspeakers.
5The rear loudspeakers do not produce any signal.
Hall (with Dolby Surround broadcasting)
5The centre sound signal is distributed over the rear loudspeakers which
creates a hall effect from the rear.
5The centre loudspeaker does not produce any signal.
This mode is recommended when you wish to add surround sound to a
broadcast which is not encoded Dolby Surround.
Off
5This mode reproduces only the left and right front sound signals.
You only hear a stereo sound if the broadcast which you are watching or
listening to is transmitted in stereo or digital sound.
4Press MENU twice.
5The MAIN MENU reappears.
"Dolby" "Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories Licensing Corporation.
DOLBY
PRO LOGIC
INSTALL
Test
Centre Volume
Balance
Rear Volume
Surround Mode
Centre
Right
Rear Rear
Left
Dolby 3 Stereo
Hall
Off
Pro Logic
SOUND Volume
Balance
Graphic Equalizer
Sound Style
Sound Mode
Loudness
Speech
Spatial
Headphone
Dolby Pro Logic Install
*