36
Reproduce Picture and Sound of
connected peripheral equipment
123
456
c
E
e
B
B
B
B
OK
a0
K
L
K
L
B
MENU
VCR 1
VCR 2
SAT
AMP
TUNER
TAPE
DCC
CD
TV
M
a
TV
Most of the audio and video equipment from our range of products can be
operated with the remote control of your TV.
Press Mon the remote control repeatedly until the arrow in the display
indicates the equipment you want to operate with this remote control.
To operate your TV again, first press the TV key and enter the
programme number of the TV channel you want to watch with the
digit keys.
a. Reproduce picture and sound from equipment connected only with an aerial
cable
4Switch your TV on.
4Select the programme number under which you have stored the test signal
with the digit keys .
4Switch on your equipment.
(See the handbook for your equipment.)
5The picture and/or sound is reproduced.
If you want to watch TV channels again.
4Enter the programme number of the TVchannel which you want to watch with
the digit keys.
b. Reproduce picture and sound from equipment connected with a eurocable
4Switch your TVon.
4Switch on your equipment.
5Either the picture and/or the sound is reproduced or descrambled.
If this is not the case :
4Press arepeatedly until the designation EXT1, EXT2, EXT3 or FRONT
appears on the screen, according to where you connected your equipment at
the back or the front of your TV.
5Either the picture and/or the sound is reproduced or descrambled.
If you want to watch TV channels again.
4Enter the programme number of the TV channel which you want to watch with
the digit keys.
c. Reproduce picture and sound from equipment connected to the front of
the TV
4Switch your TV on.
4Press arepeatedly until the indication FRONT appears on the screen.
4Switch on your equipment.
5The picture is reproduced.
If you want to watch the TV picture again.
4Enter the programme number of the TV channel which you want to watch with
the digit keys.