Philips 32PF7320 manual Tips, No power

Tips

No power	• Check the TV’s AC power cord is plugged into the mains socket. If there
	is still no power, disconnect plug. Wait for 60 seconds and re-insert plug.
	Switch on the TV again.
Poor reception	• The proximity of mountains or high buildings may be responsible for
	ghost pictures, echoing or shadows. In this case, try manually adjusting
	your picture: refer to “Fine Tune” on page 9 or modify the orientation
	of the outside aerial. If you are using an indoor aerial, reception may be
	difficult in certain conditions.You can improve reception by rotating the
	aerial. If the reception remains poor, you will need to use an external aerial.
No picture	• Check the antenna connection at the rear of the TV.
	• Try another programme to confirm whether it is a particular TV station
	problem or otherwise.
Good picture but no	• Try increasing the volume.
sound	• Check that the sound is not muted. If it is muted, press the Mute button
	on the remote control to restore sound.
Good sound but poor	• Try increasing the contrast and brightness setting.
colour or no picture
Snowish picture and	• Check antenna connection at the rear of the TV.
noise
Horizontal dotted	• Possible electrical interference e.g. hairdryer, vacuum cleaner, etc. Switch
line	off appliances.
Double images or	• Possible poor positioning of antenna. Using a highly directional antenna
“Ghost” images	may improve reception.
TV not responding	• Aim remote control handset directly at remote control sensor lens on
to remote control	the TV.
handset	• If there is no response, check whether plastic insulation sheet is removed
	and the battery is placed correctly (words on battery should be facing you).
	• Try changing the battery.
	• If the set receives no signal for 15 mins, it automatically goes into standby
	mode.
Incorrect Display	• Adjust the image position using the Horizontal Position and/or Vertical
position (PC mode)	Position in the PC Mains Controls menu.
No Video Input (PC	• Make sure the monitor cable is properly connected to the PC input
Mode)	(VGA/DVI) at the bottom of the TV.
	• Check whether the monitor cable has bent pins.
Vertical flicker	• Try eliminating the vertical bars by using the Clock Adjustment of Video
appears (PC Mode)	Noise in the Main PC Menu.
Horizontal flicker	• Try eliminating the horizontal bars by using the Phase. Adjustment of
appears (PC Mode)	Video Noise in the Main PC Menu.
Screen too bright or	• Try adjusting the contrast and brightness in the Main Menu.
dark (PC Mode)

19