Remote Control Buttons for LCD TV Functions
12) Mode*
Press this button to switch between TV, DVD or AUX.
13)
PIP on/off (refer to page 12)
14)
List of programmes
To display / clear the list of programmes. Use the buttons Îï to select a programme and the button Æ to display it.
15)
Screen Format (refer to page 13)
16)
Sound mode
Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dual5or Dual6.
The Mono indication is red when in forced position.
17)
Teletext (refer to page 14)
18)OK
Confirms selection (For DVD/AUX mode only)
19)
(Mute)
Press to mute or restore sound.
20) P –/+ Selecting TV programme
To move up or down a programme. The number and the sound mode are displayed for a few seconds.
For some TV programmes the title of the programme appears at the bottom of the screen.
21) 0/9 Numerical buttons
For direct access to programmes. For a 2 digit programme number, the 2nd digit must be entered
before the dash disappears.
22) Previous Programme
To access the previously viewed programme.
*Mode selector
(12
(13
(14
(15
(16
(17
(18
(19
(20
(21
(22
The remote control allows you to control the main functions of SOME Philips DVD or VCR models only. Note : Not available to Philips
Press the MODE button to select the required mode: DVD or AUX.
The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle. The remote control automatically returns to TV mode.
The following buttons are operational, depending on the equipment:
B X ® IÒ ‡ π †I º OK MENU ÎïÍÆ (cursor) P
5
