Kenmore 110.6704 From Inside the Dryer Cabinet, From the Exhaust Vent, To change the drum light

Models: 110.6703 110.6704

1 56
Download 56 pages 46.29 Kb
Page 25
Image 25

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending on dryer usage, Cleaning should be done by a qualified person.

From the Exhaust Vent

Lint should be removed every 2 years, or more often, depending on dryer usage.

Ohsnciin : tl e Ligl' t

The dryer light automatically turns on inside the dryer drum when you open the door.

To change the drum light

1.Unplug dryer or disconnect power.

2.Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Remove the screw located in the lower right corner of the cover. Remove the cover.

Vacation care

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should:

f.Unplug dryer or disconnect power.

2.Clean lint screen. See "Cleaning the Lint Screen."

Moving care

For power supply cord-connected dryers:

1.Unplug the power supply cord.

2.Make sure leveling legs are secure in dryer base.

3.Use masking tape to secure dryer door.

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

For direct-wired dryers:

f.Disconnect power.

2.Disconnect wiring.

3.Make sure leveling legs are secure in dryer base.

4.Use masking tape to secure dryer door.

3.Turn bulb counterclockwise. Replace the bulb with a 10-watt appliance bulb only. Replace the cover and secure with the screw.

4.Plug in dryer or reconnect power.

25

Page 25
Image 25
Kenmore 110.6704 From Inside the Dryer Cabinet, From the Exhaust Vent, To change the drum light, For direct-wired dryers