To select connected equipment
Press the v key on the remote control repeatedly, or select Source in the Setup menu (see p. 10) to select EXT1, EXT2, EXT3, Side or HDMI 1 according to where you connected your equipment.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Recorder with EasyLink
The recorder can be operated with the remote control via the Recorder menu on screen.
Rwd Play Stop Play Ffw Rec Eject
Òp ‡ π † ® Ï
Recorder 
&Press the MENU key on the remote control.
éSelect the Recorder menu with the cursor up/down.
“Press the cursor left/right, up/down to select one of the recorder functions.
The key ® for recording can be operated in the TV mode.
If your EasyLink recorder has the system standby function, when you press the B key for 3 seconds, both TV and the recorder are switched to standby.
Record with your recorder with EasyLink
In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen. Continue to press the ® record key on the remote control for more than 2 seconds.
Note: Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to EXT 1, EXT 3 or Side, you can not select another TV programme on the screen without disturbing the recording..
23
