Preparation

&Wall mounting instructions/Table stand How to mount the supplied wall mount bracket and table stand, see the supplied separate leaflet. Make sure that the wall mount is being fixed securely enough so that it meets safety standards.

The weight of the TV (excl. packaging) is about 20 kg.

Note: Other (not supplied) stands are optional accessories. Consult your dealer.

éPlace or hang the TV wherever you want, but make sure that air can circulate freely through the ventilation slots. Do not install the TV in a confined space such as a book case or a similar unit.

To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.

Insert the aerial plug firmly into the aerial socket x at the bottom of the TV.

To connect other peripherals, see p. 20.

In order to obtain the best result, please use only the supplied aerial cable between the TV and recorder, and between recorder and aerial connector.

(Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket having a mains voltage of 198-264V.

To prevent damaging the power (AC) cord which could cause a fire or electric shock, do not place the TV on the cord.

§Remote control: Insert the 2 batteries supplied (Type R6-1,5V).

The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations.

èSwitch the TV on : Press the power switch B at the right side of the TV.

A blue indicator on the front of the TV lights up and the screen comes on. If the TV is in standby mode (red indicator), press the -P+keys or the B key on the remote control.

Keys on the right side of the TV

V MENU P/CH B

Should your remote be lost or broken you can still change some of the basic settings with the keys on the right side of your TV.

Press:

the + V - key to adjust the volume;

the + P/CH - key to select the TV channels or sources.

Press the MENU key to summon the main menu without the remote control.

Use:

the + V - key and the + P/CH - key to select menu

TV

Setup

Demo

Exit

2

Picture Sound Features

items in the directions as shown;

 

• the MENU key to confirm your selection.

Note:

When activated via the MENU key on the right side of the

TV, only Exit lets you remove the menu.

Navigate to Exit and press the MENU key.

Page 4
Image 4
Philips 32PF9956 manual Preparation, Keys on the right side of the TV, Items in the directions as shown