![](/images/new-backgrounds/1287770/28777025x1.webp)
TV menu
Press the MENU key on the remote control to summon the main menu.
Note: Dependent on the input signal, one or more menu items may not be selectable.
Press the i key on the remote control to get information about the selected menu item.
Picture menu
Picture Sound Features
TV
Smart picture Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR Colour enhancement
(Hue)
Picture format
Active Control
&Press the cursor right to select Picture.
éSelect the menu items in the Picture menu with the cursor up/down.
“Adjust the settings with the cursor left/right or enter the list of submenu items with the cursor right. Select a submenu item with the cursor up/down.
Smart picture
Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in the picture menu. Note:This Philips Flat TV has been set at the factory to look best in bright store environments which use fluorescent lighting. As your home will likely not be as well lit as a store, we recommend you that you cycle through the various Smart picture modes to find the one that best suits your own viewing conditions. Most consumers will find that Natural is the correct choice.
Digital options
Pixel Plus is the most ideal setting. Dependent on your own preference, select Standard.
Dynamic contrast
Sets the level at which the TV automatically enhances the details in dark, middle and light areas of the picture.
DNR
This sets the level at which noise is measured and reduced in the picture.
Colour enhancement
This makes the colours more vivid and improves the resolution of details in bright colours.
Hue
This compensates for the colour variations in NTSC encoded transmissions.
Picture format
This will adjust the size of the picture dependent on the broadcast format and your preferred setting. See also Use of the remote control, Picture format, p. 4.
Active Control
The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.
&Select Active Control.
éPress the cursor right to enter the list of Active control values.
“Press the cursor right repeatedly to select the Active Control values Off, Minimum, Medium or Maximum.
The picture settings are being optimised continuously and automatically which is displayed by bars. The menu items can not be selected.
‘Press the OK key or wait for the time out to dismiss the Active Control display.
11